Type F H and C for Eurocard Application.
VME Extender Cards
|
VME Extender Cards Type C, F and H15 Power |
||||
|
F48 |
F24/H7 |
H15 |
Accessories |
|
|
|
|
|
|
|
|
Extender cards for VME and other Eurocard applications provide a right angle male and female connector at each end to bring the circuit paths of a PCB with a standard DIN connector out of the card cage for trouble shooting and development. Card guide ejector latches on the front end can be used as handles and to eject the board from the card cage. Some cards are available with clip-on test point loops for attaching cables. |
||||
-
|
|||
|
|
Standard 96 pin C series signal connectors at each end of this extender card bring the circuit paths from inside the card cage to the female connector on the outside. 96 clip-on test loops are available for trouble shooting and product development. Cards are available with and without ejector handles and card guides. Call for more information |
||
-
|
|||
 |
The F series extender card provides 48 circuit paths from the male connector on the card cage side to the outside female connector. Each circuit trace has contacts attached for clipping on test cab les. Cards are xyz inches long. Cards are supplied with or without ejector latches. Heavy duty ejector latches can be used for holding cards with power supplies mounted. |
||
-
|
|||
|
|
The mixed pin F24/H7 extender card provides 7 H15 contacts and 24 F type contacts. Built in clip on test loops allow attachment of cable for for trouble shooting and development. Mix and match H,F,C and F24/H series cards for 6U or 9U card cages by using the aluminum mating channels. Standard or heavy duty card guides/ejector handles can be attached as desired. Call for more information |
||
-
|
|||
|
|
The H15 extender card provides a right angle male and female connector at each end to bring the circuit paths of a 15 Amp per pin H15 connector out of the card cage for trouble shooting and development. Ejector latches on the front end can be used as handles and to eject the board from the card cage. Traces can carry 15 A/Path. The extender card length is 28cm. Call for more information |
||
-
|
|||
 |
1. Card Guides and Heavy Duty Card Guides with ejector handles act as lead in and hold in guides for cards to be brought out from the card cage. 2. Mating channel can be used to mount several cards side by side for 6U and 9U applications.
Call for more information |
||
|
|
|
|
|
|
|
2E Syscom Inc. , 86 Kendall Avenue, Framingham MA 01702 - Tel. 508 620 1678 - Fax 508 935 2286.- E Mail. 2E@2ESyscom.com |
